John Deere Z445 2008 drive extension spring diagram needed, wont pull incline

[Tom9258]

I have a Z445 2008. I am needing a copy of the diagram which will specify where the drive extension spring attaches. Also having trouble with the hydraulic arms. When in motion and on incline has a tendency to sputter when making this maneuver and also in turning with the arms. Any help would be appreciated. Thanks! Tom

 

[Richard001]

Tom,
Do you have a copy of the operators manual?

If not, it's available on the internet here:
http://www.homedepot.com/catalog/pdfImages/5b/5bef7eb2-6221-4934-98cd-5fcaaf2ac9eb.pdf

Welcome to TBN

Richard

 

[Tom9258]

Thanks for your reply. Yes I have the operators manual. Service Transmission

But it isn't clear as to where the spring attachs on the left side of the pic. There really aren't too many options to attach it to. I had asked at the dealers, but they were not wanting to comply with the knowledge. hmmm.

Tom

 

[Tom9258]

Richard,

I thought I sent a pic of it. But here it is. http://manuals.deere.com/cceomview/OMM157225_A8/Output/images/OMM157225_A868.jpg
Mine has broken twice, this is the second replacement. And with the hydrolics levers not totally wanting to incline, I am assuming its in the wrong location placement.

Thanks Tom

 

[Richard001]

Tom,

I do not own a Z445 nor do I have any user knowledge of it, I just thought that the user manual may help.

Good luck,

Richard

 

[Dianneiinn]

I have a Z445 2008. I am needing a copy of the diagram which will specify where the drive extension spring attaches. Also having trouble with the hydraulic arms. When in motion and on incline has a tendency to sputter when making this maneuver and also in turning with the arms. Any help would be appreciated. Thanks! Tom

I also have a Z445 2008 bought in July. I a having a TERRIBLE time finding a diagram or advice on how to access/remove the carburator - specifically removing the air filter "bracket" that sits over the carb. Its Labor day, small town everything is closed. I realize this is an old post, but its worth a try. Than you.

 

[Richard001]

I also have a Z445 2008 bought in July. I a having a TERRIBLE time finding a diagram or advice on how to access/remove the carburator - specifically removing the air filter "bracket" that sits over the carb. Its Labor day, small town everything is closed. I realize this is an old post, but its worth a try. Than you.

Welcome to TBN

Does your Z445 have this engine: Kawasaki FH721 ?

If not, what engine does it have ?

Richard

 

[beenthere]

Dianne
Welcome to TBN

Post a pic or two of what is causing you the problem. (Not sure what being Labor day or small town has to do with the problem. ??)

Need serial number to learn what air filter you have.

You should be able to track it down on JD parts linked here.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/70123/referrer/navigation/pgId/20445774