John Deere 4410 not moving when peddles pressed

[mfreund]

Look at the indicator on the rt fender, there will be a series of long and short flashes. Write them down. Let it go through the series a few times to make sure you got the right and post them. Then we will know where to tell you to look. If you want to do a visual inspection, look under the tractor on the right side to see if some brush pulled out the wires to the pedal potentiometers.

 

[chrise2312]

Is there a site glass or dip stick to see if the transmission oil is at the proper level.

 

[kennyd]

Is there a site glass or dip stick to see if the transmission oil is at the proper level.

Yes, rear of the machine near the PTO shaft.

Here is a link to the online owners manual: OMLVU13193_H2