john deere 4400 ?
- Thread starter glrydr
- Start date
- Views: 3309
-
- Tags
- john deere 4400
kennyd
Advertiser
Welcome to TBN
Your post will be better served in the JD forum...but there is not a general problem with the 4400's, what specific problem are you having?
Your post will be better served in the JD forum...but there is not a general problem with the 4400's, what specific problem are you having?
kennyd
Advertiser
Not a very common problem, but I have heard of the before. Read this thread about a fix: JD4300 -- Catastrophic Failure of the Shift Shaft - TractorByNet.com
Basically, the shafts need to lubricated to keep corrosion at bay where they enter the casing. Happens to the brake shafts also (although they just seize up and cause the brakes to drag).
Basically, the shafts need to lubricated to keep corrosion at bay where they enter the casing. Happens to the brake shafts also (although they just seize up and cause the brakes to drag).
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,649
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I have the JD 4300 hydro, and did not know about lubricating that area. Will certainly look into it. Thanks for the heads up.
Mine is always shedded, and normally dry. Maybe that helps.
But having it break off is certainly a problem.
Mine is always shedded, and normally dry. Maybe that helps.
But having it break off is certainly a problem.
kennyd
Advertiser
Fluid Film is great for area's like this, it does not evaporate quickly like other lubricants do. The brake shaft are a real common problem-and the brake return springs are know for breaking as well.
