John Deere 3320 heater blower location
- Thread starter kromws
- Start date
- Views: 1570
-
- Tags
- john deere 3320
seville009
Veteran Member
- Joined
- Oct 22, 2007
- Messages
- 1,569
That is a super helpful video! Thanks. 
Any thoughts on why my fuse (in the steering column) would have blown when I tried turning the blower on high during the winter? When I powered up the heater was on and the blow on low. I smelled a faint burning smell and tried turning the blower up on to high and bam -- electronics blinked and the radio and blower stopped. Rest came back and I could go plow the snow but without heat or radio (blown fuse). Was originally thinking a mouse nest in the blower, but watching your video that seems less likely.
Any thoughts on why my fuse (in the steering column) would have blown when I tried turning the blower on high during the winter? When I powered up the heater was on and the blow on low. I smelled a faint burning smell and tried turning the blower up on to high and bam -- electronics blinked and the radio and blower stopped. Rest came back and I could go plow the snow but without heat or radio (blown fuse). Was originally thinking a mouse nest in the blower, but watching your video that seems less likely.Opened the roof, nothing blocking the blowers ... actually very clean and fan elements are free-moving. Anybody know if there is a separate electric heater used when on heat mode or if it just uses engine heat like a car? I have been assuming no separate electric heater but will check that if there is one.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,998
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
My Kubota uses relays to run the blower motors (multi speed). Maybe yours does as well.
Received a new blower from eBay and it was wired for a direct drop in (amazing) and it works great. Must have been a bad blower. Now replacing the gasketing around the roof and bolting the roof on and should be good to go. Thank you so much @seville009 for posting that video! It gave me the confidence and direction to tackle this myself and resolve for less than 1/2 the price of just transporting the tractor to get it fixed, let alone their repair price!
