John Deere 301 adding rear hydraulics.

[jcharley]

I have a base model john deere 301 and I'm wanting to add 1 or 2 rear controls. I'm leaning towards an aftermarket valve and was hoping for some suggestions. I'm also wanting to confirm how to plumb it. I know it's a closed center system and the return line goes to the filter and have ordered the ported filter cover. I'm unsure of where to tee in for the pressure side. I appreciate any and all advice.

Thanks,
Jeff

 

[Tx Jim]

Attach a fitting in orifice on pressure control on RH side by hyd filter housing where fitting(key 15) is pictured. You'll need a 3/4'' ORB fitting to screw into valve housing

 

[jcharley]

Thank you!