John deere 300

/ John deere 300 #1  

JohnDeere300

New member
Joined
Jan 22, 2013
Messages
4
Location
Kewanee,IL United States
Tractor
John Deere 300, John Deere 314, John Deere 112
I am gonna buy a John Deere 300 but it has a oil pan leak. So it needs a new oil pan gasket. How hard is that kind of a job.?
 
/ John deere 300 #2  
Is it a garden tractor or utility sized tractor ? If it is the garden tractor you will have to remove the engine . That should have the K 341 Kohler , single cylinder 16 HP . Once it is out the pan gasket is simple . That engine is heavy .
 
/ John deere 300
  • Thread Starter
#3  
Yes its the garden tractor. And thank you for your help. Will I have to disconnect the wiring harness too then?
 
/ John deere 300 #4  
Yes but I think there are only a couple wires going to the engine itself . You will need to undo the driveshaft that goes back to the hydrostat trans . There is acoupler where driveshaft hooks to engine . Hope this helps .
 

Marketplace Items

ALLEN AR16 BUGGY (A63569)
ALLEN AR16 BUGGY...
2008 DOOSAN G25 GENERATOR (A63569)
2008 DOOSAN G25...
2025 Unused SDLGC80 60v Electric Golf Cart (A64194)
2025 Unused...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
Merlo MF34.7 CS (A62177)
Merlo MF34.7 CS...
2019 UTILITY VS2DX 53' X 102" T/A VAN TRAILER (A59910)
2019 UTILITY VS2DX...
 
Top