Jogn Deere Stabilizer/sway bar question.

   / Jogn Deere Stabilizer/sway bar question. #11  
It's not normal for sway bar brackets be attached to draft links 180° opposite. As I previously stated RH sway bar bracket needs to have nut loosened & bracket rotated 180° so both sway bar brackets are attached the same way on each draft arm then nut tightened. Notice green area on mounting brackets in photo. This falls under correct geometry of sway bar attaching parts!!!!!!!!!
Screenshot 2025-04-06 102709.png
 
   / Jogn Deere Stabilizer/sway bar question. #12  
Ayep!! If you want symmetry, you have make things symmetrical side to side.
 
   / Jogn Deere Stabilizer/sway bar question. #13  
It's not normal for sway bar brackets be attached to draft links 180° opposite. As I previously stated RH sway bar bracket needs to have nut loosened & bracket rotated 180° so both sway bar brackets are attached the same way on each draft arm then nut tightened. Notice green area on mounting brackets in photo. This falls under correct geometry of sway bar attaching parts!!!!!!!!! View attachment 3221684
Tx Jim, I didn't see what you meant - the first time you said it - I sure do see what you meant now though! You are correct for sure, that bracket being 180 out will cause exactly the problem the OP is having. Thanks for reshowing these pics, cleared up any confusion I had!
 
   / Jogn Deere Stabilizer/sway bar question. #14  
You're welcome.
I'm glad you realized what I was stating was correct.
 

Tractor & Equipment Auctions

71067 (A49346)
71067 (A49346)
2021 CATERPILLAR 317 EXCAVATOR (A51242)
2021 CATERPILLAR...
1989 Freightliner FLD120 (NEW CAT 3406A, NEW REAR ENDS, CLUTCH) (A50397)
1989 Freightliner...
2013 AMSIG S/A Solar Towable Message Board (A50322)
2013 AMSIG S/A...
2007 FREIGHTLINER BUSINESS CLASS M2 DUMP TRUCK (A51406)
2007 FREIGHTLINER...
HANG ON 48" CATERPILLAR FORKS (A51242)
HANG ON 48"...
 
Top