Jogn Deere Stabilizer/sway bar question.

[Tx Jim]

It's not normal for sway bar brackets be attached to draft links 180° opposite. As I previously stated RH sway bar bracket needs to have nut loosened & bracket rotated 180° so both sway bar brackets are attached the same way on each draft arm then nut tightened. Notice green area on mounting brackets in photo. This falls under correct geometry of sway bar attaching parts!!!!!!!!!

 

[jigs_n_fixtures]

Ayep!! If you want symmetry, you have make things symmetrical side to side.

 

[Gregster613]

It's not normal for sway bar brackets be attached to draft links 180° opposite. As I previously stated RH sway bar bracket needs to have nut loosened & bracket rotated 180° so both sway bar brackets are attached the same way on each draft arm then nut tightened. Notice green area on mounting brackets in photo. This falls under correct geometry of sway bar attaching parts!!!!!!!!! View attachment 3221684

Tx Jim, I didn't see what you meant - the first time you said it - I sure do see what you meant now though! You are correct for sure, that bracket being 180 out will cause exactly the problem the OP is having. Thanks for reshowing these pics, cleared up any confusion I had!

 

[Tx Jim]

You're welcome.
I'm glad you realized what I was stating was correct.