JD112

[nobody cares]

I have a jd 112( around a 1975 ) that has a hydralic lift. i had to put about a half pint of hyd. oil to fill the tank , still will not lift the snowblower. Anything else i should check to see why the hyd. are not working ??? Thnx Dave

 

[Markcuda]

I don't think nobody cares:laughing:

 

[nobody cares]

Maybe you don't remember back in the day, People would come back with nobody cares. Just a old saying . Dave

 

[Ledgemere Farm]

is it leaking oil? is the hydraulic cylinder working when you actuate the cylinder? is the drive belt slipping that goes from the engine to the pump?

 

[nobody cares]

Thnx for the reply. Got er fixed yesterday. Did a little tweeking , and whalla everything working. Hydralics and snowblower are working nicely. Snowblower is pretty loud. Maybe because of the chain drive auger. Will have to tweek on it a bit. Dave :thumbsup:

 

[Ledgemere Farm]

take the chain cover off the RH side of the blower and make sure its tight. Shouldnt sag more than 1/2 inch or so. adjustment is on the RH side of the mount. Its on the shaft from the drive pulley. Give the shaft and the chain a couple shots of multipurpose grease.

 

[nobody cares]

Ok, thnx for the info. I'll check it out. Dave :tractor: