Jd 6110 swapped computer, inst pnl dark won't move.
- Thread starter flyjess
- Start date
- Views: 1646
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,556
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
:welcome: to TBN
Some history of the swap to a new computer would help..
Some history of the swap to a new computer would help..
Rara Avis
Veteran Member
Which computer?...ECU, PEC, RCU, SFA?
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,702
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
G'day Mate and welcome to TBN from Downunder.
My guess is that the computer chip needs to be 'initiated' by the/a JD dealership. Basically, a computer 'doesn't know' that it is a computer whenever it is turned (back) on. It reads a programme of instructions that tells it what it is and what it can do. Once programmed, a battery provides a 'keep alive' voltage to secure to programme and data after you shut down the 'machine' so that it's available the next time you start it up.
Enjoy the site.
My guess is that the computer chip needs to be 'initiated' by the/a JD dealership. Basically, a computer 'doesn't know' that it is a computer whenever it is turned (back) on. It reads a programme of instructions that tells it what it is and what it can do. Once programmed, a battery provides a 'keep alive' voltage to secure to programme and data after you shut down the 'machine' so that it's available the next time you start it up.
Enjoy the site.
