JD 2720 issue with re-attaching bucket

   / JD 2720 issue with re-attaching bucket #1  

ElusiveThorn

New member
Joined
May 28, 2009
Messages
10
Hi Everyone,

When I re-attach my bucket I'm able to get it in place so I can lock it. But the parking bar on the bucket I can't figure out how to get it raised high enough so that the inside of my front tires are not hitting the parking bar if I turn the wheels.
 
   / JD 2720 issue with re-attaching bucket #2  
sounds like you bent the bar. this is a common issue on the 200cx loaders. i usually put a 2x4 under the bar so it has a nice hard surface to slide on when removing the loader. if the bar binds at all on concrete or in dirt it will bend.
 
   / JD 2720 issue with re-attaching bucket
  • Thread Starter
#3  
hanson you are correct, sir. I figured out later today that was the problem My issue is I have a snow blower and when they unloaded it from the trailer for delivery I left one of the attachments on the tractor. I took off one of the attachment but there was a second one that needed to be taken off. Brand new tractor and me being a newbie I thought the attachment had always been on the tractor. Ugh. Thanks for your response!
 

Tractor & Equipment Auctions

2014 Gillig Transport Bus (A50323)
2014 Gillig...
1995 OTTAWA SPOT TRUCK (A50459)
1995 OTTAWA SPOT...
2024 Chevrolet Silverado Pickup Truck Bed (A49461)
2024 Chevrolet...
Unused 2025 CFG QNT50R Mini Excavator (A49461)
Unused 2025 CFG...
16 STEEL SHEETS CURVED (A50854)
16 STEEL SHEETS...
2000 WINNEBAGO FORD F550 RV (A50854)
2000 WINNEBAGO...
 
Top