JD 2720 issue with re-attaching bucket

   / JD 2720 issue with re-attaching bucket #1  

ElusiveThorn

New member
Joined
May 28, 2009
Messages
10
Hi Everyone,

When I re-attach my bucket I'm able to get it in place so I can lock it. But the parking bar on the bucket I can't figure out how to get it raised high enough so that the inside of my front tires are not hitting the parking bar if I turn the wheels.
 
   / JD 2720 issue with re-attaching bucket #2  
sounds like you bent the bar. this is a common issue on the 200cx loaders. i usually put a 2x4 under the bar so it has a nice hard surface to slide on when removing the loader. if the bar binds at all on concrete or in dirt it will bend.
 
   / JD 2720 issue with re-attaching bucket
  • Thread Starter
#3  
hanson you are correct, sir. I figured out later today that was the problem My issue is I have a snow blower and when they unloaded it from the trailer for delivery I left one of the attachments on the tractor. I took off one of the attachment but there was a second one that needed to be taken off. Brand new tractor and me being a newbie I thought the attachment had always been on the tractor. Ugh. Thanks for your response!
 

Tractor & Equipment Auctions

80in HD Tooth Bucket with Side Cutters ONE PER LOT (A51039)
80in HD Tooth...
HONDA EU2200EI INVERTER GENERATOR (A50854)
HONDA EU2200EI...
1994 Mack CH613 T/A Wet Kit Day Cab Truck Tractor (A49461)
1994 Mack CH613...
Case Ih 2388 Combine (A50514)
Case Ih 2388...
2021 John Deere 333G Compact Track Loader, 390 Hours, High Flow Hydraulics, Ride Control (A51039)
2021 John Deere...
2022 Bobcat E88 Excavator (RIDE AND DRIVE) (A50774)
2022 Bobcat E88...
 
Top