chipperoyea
New member
My 2155 JD steering and three point hitch don't operate correctly after tractor gets warm.Could it be screen and/or filters?
JD 2155 hydrolics, steering and three point hitch are slow after oil gets warm
- Thread starter chipperoyea
- Start date
- Views: 1851
-
- Tags
- john deere 2155
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,532
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
:welcome: to TBN
What is the history of the screen and filters? Hours since change would help answer your question.
What is the history of the screen and filters? Hours since change would help answer your question.
mddorange
Elite Member
- Joined
- Jul 16, 2014
- Messages
- 3,357
- Location
- Guin, AL
- Tractor
- 2014 Kubota L3200 DT w/LA524 FEL, Loaded rear tires, LP RCR 1860 5' Cutter, LP RTA 1258 5' Tiller, LP PFL 2042 Pallet Forks w/60" Extensions, KK BB60 Box Blade, KK PHD-12" Post Hole Digger
:welcome:
To the forum from Northwest Alabama. Does it operate correctly before the tractor gets warm?
To the forum from Northwest Alabama. Does it operate correctly before the tractor gets warm?
Tx Jim
New Member
:welcome:
I would suggest to change hyd filter & check/clean sump screen. Then check stand-by pressure which should be 2250 psi. Is tractor equipped with hyd ind pto &/or hyd reverser/hi-lo?????? The afore mentioned options have supply tubes that could be leaking.
I would suggest to change hyd filter & check/clean sump screen. Then check stand-by pressure which should be 2250 psi. Is tractor equipped with hyd ind pto &/or hyd reverser/hi-lo?????? The afore mentioned options have supply tubes that could be leaking.
OP
chipperoyea
New member
Don't know tractor belongs to friend, but do pLan to change all filters and clean screen as well. That seems to be the general consenses