JD 2010 Axel Hub Problem

   / JD 2010 Axel Hub Problem #1  

Farwell

Veteran Member
Joined
May 7, 2005
Messages
1,013
Location
Farwell, Michigan
Tractor
JD 2010
I posted this on the JD site, had a lot of lookers but no posters so I thought I would give Parts and Repairs a shot.
I own a 1965 JD 2010 Row Crop that has had a couple issues with the rear hub and hub cap that holds the wheel to the axle. The first time the wheel actually fell off the tractor because the key that locks the axle shaft to the wheel came out due to loose hub cap bolts that I didn't find when inspecting the tractor.
Today I was moving some dirt with my FEL when I heard a bang. I looked the tractor over quickly and couldn't find any problem but decided to quit working until I found the source of the noise. I found two of the four bolts missing that hold the hub cap, the key and the hub to the axle. The bolts were there when I last inspected the tractor. When I had the first problem I torqued the four bolts according to the service manuals specs. Any idea what could be causing my problem?
 
   / JD 2010 Axel Hub Problem
  • Thread Starter
#2  
I think I found the answer, the recommended torque is 160 and I only torqued to 80. I didn't read far enough in the manual.
 
   / JD 2010 Axel Hub Problem #3  
glad you found the problem, usually "bolts come loose" problems have basic answers. Years ago I worked for a ford dealership, they had a big recall because wheels were coming off their trucks!! the big fix was to torque them down tighter...... :rolleyes:
 

Tractor & Equipment Auctions

2014 RAM 5500 FLATBED TRUCK (A51222)
2014 RAM 5500...
2014 TOYOTA 8FGCU25 FORKLIFT (A51222)
2014 TOYOTA...
2008 Ford F-350 4x4 Crew Cab Pickup Truck (A50323)
2008 Ford F-350...
2018 FREIGHTLINER 1085D DUMP TRUCK (A51406)
2018 FREIGHTLINER...
2015 Ford F-550 Godwin 184U Crew Cab Mason Dump Truck (A48081)
2015 Ford F-550...
Komatsu PC490LC-11 Hydraulic Excavator (A49346)
Komatsu PC490LC-11...
 
Top