Is Kioti addressing ongoing problems

[logdog]

So you could lift it with lift cylinders? The curl cylinders seem very very strong to me but I haven't had any thing heavy enough to be a challenge.

Yep. Lifted it up enough to let the truck return to normal height and give me 6-8 inches clearance as I pulled it back.

 

[grsthegreat]

very odd. I just recently offloaded 2,000# ( 32 bags of 60# crete)of concrete bags off of my flatbed with my tractor, however i did have the chipper on the back. Without the rear ballast ir might have lifted the rear wheels.

have a 400# set of front forks. It lifted the load easily.

Personally i dont have to road travel it much so i dont care about the roading speeds.

 

[billy2hats]

I have a Kioti FX 751 had a factory shuttle upgrade as this model had problems, after going back to the dealer twice it is now stuck in reverse , clutch makes no difference tractor just keeps going backwards. Any ideas

 

[duckruck]

Go to general forums, parts/repairs you will see problems with mostly other tractors rather than kioti

 

[duckruck]

Go to general forum parts/repairs. Lots of problems on tractors other than kioti

 

[grm61]

this is a thread from 2012