I'm confused here...

[chucko]

Re: I\'m confused here...

Now do you guys realy think he picks up the oil dry? /forums/images/graemlins/grin.gif

 

[frank_f15]

Re: I\'m confused here...

</font><font color="blue" class="small">( Get a scale and weigh a quantity of Speedy Dry..... then use the Speedy Dry to pick up the oil. Sweep all this into a container and weigh it. Then deduct the tare of the container and the original weight of the Speedy Dry. This will tell you the physical weight of the oil that you spilled, not the oil weight. Empty container of contaminated Speedy Dry/oil and pour into the container, the proper amount of fresh oil to equal the physical weight of the oil spilled. Add to that 3% additional oil for the amount of oil that has soaked into the concrete. You calculations if done properly should be good enough for Government work to Military Standard... 89-47650-AB-54286- for recovery of spilled oil.

)</font>

I'LL BE DARNED THAT IS EXACTLY THE WAY I DO IT! /forums/images/graemlins/grin.gif /forums/images/graemlins/wink.gif

 

[Junkman]

Re: I\'m confused here...

</font><font color="blue" class="small">( I'LL BE DARNED THAT IS EXACTLY THE WAY I DO IT! /forums/images/graemlins/grin.gif /forums/images/graemlins/wink.gif )</font>

Great minds think alike..... /forums/images/graemlins/confused.gif /forums/images/graemlins/confused.gif

 

[PineRidge]

Re: I\'m confused here...

<font color="blue"> The standard rule that I use is to measure what came out and put back an identical amount. Manuals and dip sticks have been known to be wrong many times before... </font>

Junkman anyone, and I do mean anyone, that knows you will testify that you started 3 quarts low to begin with! /forums/images/graemlins/grin.gif

 

[cperky]

Re: I\'m confused here...

</font><font color="blue" class="small">( Getting ready to break up a 12x15 concrete patio (renting a jackhammer) and starting on a 14 x 20 deck...........

Ron )</font>

Ron I too am going to be breaking up a 15X20 concrete pad. I was going to rent a concrete saw and cut the pad into sections to haul off. Have you (or anyone else)tried either method before? (saw vs. jackhammer)

Chris

 

[daedong]

Re: I\'m confused here...

Junkman,

I'm impressed, but you failed to include the volatile components of the oil /forums/images/graemlins/smirk.gif

 

[gabby]

Re: I\'m confused here...

Jackhammer