I-match bushing question

   / I-match bushing question
  • Thread Starter
#41  
Did one set of these bushings come with the hitch . . or are you on your own with this kit?

I'm picking up my part PM03015 today, which will be effectively two big end bushings and roll pins for $20. The inner basic bushing is not included but TSC sells those for about $10/pair. So approx $30 for the equivalent. However . . . .

The inner bushing with the roll pin holes are not avail at TSC (in CDA anyway) . . .I wonder if that will be a problem. I could see that without those I could get a wobble potential without support underneath the entire length of the black bushing. Hmmmmm.

I'll report back or add pics later today.
 
   / I-match bushing question #42  
I believe the hitch came with a set of bushings, but not the ones I pictured.
The bushings that came with the I-Match hitch were just tubes to convert cat1 to cat2? I don't know my cats...
 
   / I-match bushing question
  • Thread Starter
#43  
jeepinator said:
I believe the hitch came with a set of bushings, but not the ones I pictured.
The bushings that came with the I-Match hitch were just tubes to convert cat1 to cat2? I don't know my cats...

Well at least I'm not alone. That's what I got. Those bushings . .well mine ayway . . actually were double thickness. They converted from cat 1 to the imatch cat 3 size in one bushing. They worked on my JD cutter . . but I needed the wider ones with the big end for my ballast box. For the record, the US$9.95 bushing/roll pin part worked well with my ballast box using a cat 1 to 2 bushing underneath. They threw those in no charge.

Ideally, though, I would still recommend the complete kit part num mentioned earlier at about $40 for a PAIR each of big end bushings, roll pins and a full length special inner bushings.
 
   / I-match bushing question #44  
This thread provided me with all the info I needed, thanks everyone!
I just got the iMatch and needed bushings and the JD stuff was confusing.
I went with the TSC bushings (Speedco) because they are one piece and zinc plated. No adapters needed, include roll pins and are available online for $23.99 with free shipping on orders over $25.00.

0265325.jpg


Link to order page:
Tractor Supply Company - SpeeCo Cat 1 Quick Hitch Bush 3 Point Kit
 

Tractor & Equipment Auctions

2011 YAMAHA GRIZZLY 550 ATV (A54756)
2011 YAMAHA...
UNUSED RAYTREE RMLS18T HYD LOG SPLITTER (A54757)
UNUSED RAYTREE...
2025 GIYI SGB20 20in Single Cylinder Stump Grapple Bucket Skid Steer Attachment (A53421)
2025 GIYI SGB20...
2006 Chevrolet TrailBlazer SUV (A55758)
2006 Chevrolet...
2017 Ford Explorer AWD SUV (A54815)
2017 Ford Explorer...
2018 KENWORTH T880 DAYCAB (A55745)
2018 KENWORTH T880...
 
Top