I have a water leak to or at my yard hydrant

   / I have a water leak to or at my yard hydrant #1  

tomplum

Elite Member
Joined
Jan 30, 2017
Messages
2,799
Location
PNW
Tractor
XJ2025H
I suspected a leak and confirmed that it does....somewhere. It is plumbed w/ ~200' PVC and put the whole works in ~ 7 years ago and mostly runs the edge of the driveway. There is no outward signs of leakage. Do hydrants themselves somehow leak or is it more likely a plumbing problem?
 
   / I have a water leak to or at my yard hydrant #2  
I always thought, rigid PVC was not permitted under code for inground
 
   / I have a water leak to or at my yard hydrant #3  
I've replaced ours at least 3 times already and candidly, I'm sick of it.
 
   / I have a water leak to or at my yard hydrant #4  
I had to replace mine. They don't put much galvanized coating on the pipe end where the seal is located in the ground. So it rusts and no longer seals. Tried a rebuild kit. Total waste of time. Replaced with another equally as sorry entirely new hydrant.
 
   / I have a water leak to or at my yard hydrant #5  
Yes, hydrants leak, often from the washer at the bottom. Have you checked?

All the best, Peter
 
   / I have a water leak to or at my yard hydrant #6  
I suspected a leak and confirmed that it does....somewhere. It is plumbed w/ ~200' PVC and put the whole works in ~ 7 years ago and mostly runs the edge of the driveway. There is no outward signs of leakage. Do hydrants themselves somehow leak or is it more likely a plumbing problem?
Lots of youtubes showing how to test and replace hydrants parts.
 
   / I have a water leak to or at my yard hydrant #8  
I always thought, rigid PVC was not permitted under code for inground
My brother got a government subsidy to run rigid white PVC in ground to his pastures. This causes me to think it met code for that purpose.
 
   / I have a water leak to or at my yard hydrant #9  
I always thought, rigid PVC was not permitted under code for inground

Locally no agency inspects residential water lines. Even if they did a big percentage of the municipal water supply lines are pvc.
 
   / I have a water leak to or at my yard hydrant #10  
Poly well pipe seems to be more forgiving of earth shifting around. One tip when replacing the hydrant, put a 1/4 street el and short nipple in the drain outlet, keeps debris from scoring the valve and creating a leak down the road.
 

Tractor & Equipment Auctions

2016 Hurricane Blo-Vac X3 Stand-On Blower (A50324)
2016 Hurricane...
NEW 2024 LOAD TRAIL 83IN X 14FT Tandem Axle Dump Low-pro Trailer (A52748)
NEW 2024 LOAD...
John Deere Gator 825i 4x4 Utility Cart (A50322)
John Deere Gator...
SpotWeld RockerRite 480V Arm Type Spot Welder (A50322)
SpotWeld...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2013 Ford E-350 Enclosed Service Van (A50323)
2013 Ford E-350...
 
Top