I got my L 5030 cab tractor

[slowzuki]

There is a picture on here of a 5030HSTC with the hoe on. Just search around a bit.

 

[DDT]

I got my front blade and installed it today. any one eles have one one the 5030?

 

[DDT]

pic #2

 

[DDT]

Last one.
jury is still out on the backhoe, parts are not here yet.

 

[Deerlope]

I have a front blade and blower on a 3830. My blade is much heavyer. 7 1/2' Fisher power angle. Mine drive way is gravel so I us the blade until everything freezes down really good then change to the blower.

 

[DDT]

I noticed on my blade if angling it to the right I have to put the hyd lever in the float to make it go. (this is the side motion to the right, not down posstion) The 1st detent does not make any thing happen. Is your like that or is some thing wrong?

 

[slowzuki]

It is because of the regenerative function on the valve allowing a fast dump of the bucket. When you push past you get powered dump.

 

[DDT]

OK my spacers came in today. They are 3 1/2" thick andd they sent longer bolts, they are black instead of orange but you can see it good. It was dark before I got it done so I took pics in the shed. I was able to slid the seat back over 1" from the min stop. This clears the glass 1/2". I feel a lot better know.

 

[DDT]

Man I hit the wrong button.

 

[DDT]

another #2

 

[DDT]

another#3

 

[DDT]

another, last one
Don't worry I was able to hold on enough so I do not fall off the last pic.

 

[slowzuki]

Any action photos yet? Has anyone asked 5030 (Daryl) for his olyimpic plate weight idea?

 

[DDT]

Are you refering to the hoe I assume or the tractor. I have only 3 hours on the hoe so far. The ground is frozen with snow and ice on right now. When the weather breaks it will be stumps-r-us.