I have a problem with my sol's 1863. They called with a hydraulic problem. No lift and no drive. I checked and there was no fluid on the stick. No choice but Ace so bought 1/2 gal. hydraulic fluid. This didn't get to the stick, and still no hydraulic. Next day, tried draining that and put a gallon of NAPA hydraulic in it, that didn't solve the problem. Any ideas? Thanks in advance to all who help.
hydro problem
- Thread starter tyrone
- Start date
- Views: 2026
rus_geek
Gold Member
What is the capacity for this tractor? If adding a half gallon didn't bring it up to the stick, you're still low. If you don't have enough fluid, you don't have a "complete" system, so I wouldn't expect anything to work.
My last addition was 1 gallon. It was actually an exchange because we drained out the 1/2 gallon we put in the day before. I think the capacity is approximately 7 qts. So we have a way to go. At the price, I guess I'll just mix the two and add a quart. Whaddya think?
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,920
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
Replace the Hydro filter and fill with almost 2 gal of fluid - the stick will show low until the last quart but you should still get some movement even a quart low..
If the unit was running/driving before and this just started then there is a leak - possibly the relief valves - if you use other fluids than Hytran (CC fluid) it could affect the performance but if no movement at all then fluid type is not the issue - its a filter or somethings awry in the hydro.
Fill with hydro fluid (preferably Hytran) and make sure the filter is changed then go from that point.
If the unit was running/driving before and this just started then there is a leak - possibly the relief valves - if you use other fluids than Hytran (CC fluid) it could affect the performance but if no movement at all then fluid type is not the issue - its a filter or somethings awry in the hydro.
Fill with hydro fluid (preferably Hytran) and make sure the filter is changed then go from that point.
Donsyl
Silver Member
- Joined
- Aug 23, 2009
- Messages
- 161
- Location
- Central Arkansas
- Tractor
- Cub Cadet 1811 \and a cub cadet 149
Tyrone, im not sure if the 1863 is anything like my 1811, but i had a seal leaking on mine and was a gallon low.............if you are sitting on the tractor, on the right side of the transmission under the seat and fender section, there is a seal that is about the size of a quarter. Mine was leaking...put fluid in the tractor and drive it for a minute or two. Then look under the tractor and see where the fluid is leaking from............if it is on the right side, it may be that seal............
