I'm a hydraulics noob and am trying to figure out how to hook up a log splitter to my TC-33D. The pressure out is pretty obvious but where does the return line connect, to pressure return or to reservoir return? When would you use one over the other?
hydraulics return
- Thread starter kgoring
- Start date
- Views: 1555
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Do you have a set of remotes you are tapping from.. or are you tapping hyds off another location.. like a diverter block.
Is your splitter spring return and SA.. or DA/hyd return?
soundguy
Is your splitter spring return and SA.. or DA/hyd return?
soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If your splitter is using a DA cyl.. you will need a DA spool valve. If the splitter has it's own valve.. and it is OC.. it will need a pressureline from the tractor, and return line to the sump. Make sure you know what/where to tap power off of..
soundguy
soundguy
