Hydraulics on a john Deere 5400

   / Hydraulics on a john Deere 5400 #1  

valerie1961

New member
Joined
Apr 25, 2017
Messages
6
Location
thornfield missouri
Tractor
5400 john deere
I've put on a hydraulic remote on my tractor. I took it off my old tractor same model but one year newer. The bucket will go up and down but will not curl. It worked fine on my old tractor but will not operate on my newer one. Any suggestions?
 
   / Hydraulics on a john Deere 5400 #2  
Sorry, but that's not much of an explanation of what took place. What "remote"? Is this a factory remote valve stacked onto the side of the lift housing or is it a dedicated loader valve? Does one valve work and the other not? We can't see what you have or what you've done so your details are all we have to go on.
 
   / Hydraulics on a john Deere 5400 #3  
Pictures please.
 
   / Hydraulics on a john Deere 5400 #4  
I've put on a hydraulic remote on my tractor. I took it off my old tractor same model but one year newer. The bucket will go up and down but will not curl. It worked fine on my old tractor but will not operate on my newer one. Any suggestions?
Uncouple and re-couple your connections to the bucket, often they may just not be fully connected and will give this result. I know the remote has no direct connection to the bucket, but it's worth a try at least.
 
   / Hydraulics on a john Deere 5400
  • Thread Starter
#6  
Sorry, but that's not much of an explanation of what took place. What "remote"? Is this a factory remote valve stacked onto the side of the lift housing or is it a dedicated loader valve? Does one valve work and the other not? We can't see what you have or what you've done so your details are all we have to go on.
My new to me tractor did not have the remote for the bucket or loader. I removed all the needed bits from my old tractor and put them on my newer tractor. Added the by remote beside the back tire, added the rear couplings, joystick and everything for the loader remotes. It will only raise the bucket up and down but not curl it. What did I neglect to do
 
   / Hydraulics on a john Deere 5400 #7  
Try swapping the lines from raise - lower to curl dump to see if either function will now operate.
 

Tractor & Equipment Auctions

City of Lakeland (A51691)
City of Lakeland...
JOHN DEERE 608C (A53084)
JOHN DEERE 608C...
JOHN DEERE 3032E TRACTOR (A51247)
JOHN DEERE 3032E...
(4) 5 LUG GRAND PRIX ALUMINUM WHEELS (A51248)
(4) 5 LUG GRAND...
UNUSED CHERY INDUSTRIAL 20' BI-PARTING IRON GATE (A51248)
UNUSED CHERY...
2008 JLG 450AJ SERIES II MANLIFT (A51246)
2008 JLG 450AJ...
 
Top