tpulley
Silver Member
Just had a thought... If I were to build a shear to cu say up to 5 inch diameter trees could I run this with my 3rd Junction valve lines I have for my grapple? Does it have enough force to shear a tree off?
Hydraulic Tree cutter/shear
- Thread starter tpulley
- Start date
- Views: 3730
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Sure, force is determined by pressure, and speed of the cyl is determined by volume in GPM's.
A 3 in cyl bore with 3000 psi, can generate a force of 21,206 lbs of force. About 10 ton
A 4 in cyl bore with 3000 psi, can generate a force of 37,699 lbs. About 18.8 ton
A 3 in cyl bore with 3000 psi, can generate a force of 21,206 lbs of force. About 10 ton
A 4 in cyl bore with 3000 psi, can generate a force of 37,699 lbs. About 18.8 ton
Attachments
Last edited:
