hydraulic top link - is it worth it?

KiotiJohn · May 30, 2006

I can tell you that as many times as I adjust the top link for when I'm doing serious box blade work, it would be worth it, and I'm going to add it.

I have to get on and off many times during the course of fair-sized job as I alternate using rippers, inside rear blade and rear outside blade to do different leveling or digging actions. A top cylinder alone would save me a LOT of work.
John

KiotiJohn · May 30, 2006

I can tell you that as many times as I adjust the top link for when I'm doing serious box blade work, it would be worth it, and I'm going to add it.

I have to get on and off many times during the course of fair-sized job as I alternate using rippers, inside rear blade and rear outside blade to do different leveling or digging actions. A top cylinder alone would save me a LOT of work.
John

Slamfire · May 30, 2006

Here's a less expensive, although harder to use alternative.

ratchet jack top link thread

Slamfire · May 30, 2006

Here's a less expensive, although harder to use alternative.

ratchet jack top link thread

KiotiJohn · May 30, 2006

( Here's a less expensive, although harder to use alternative. )
Nothing came up but a bland page. Recheck your URL
John

KiotiJohn · May 30, 2006

( Here's a less expensive, although harder to use alternative. )
Nothing came up but a bland page. Recheck your URL
John

Bob_Young · May 30, 2006

With regard to selecting the right top-link length: Keep in mind that if you go to Pat's EZ-Hitch, it'll move the implement about 3" further back from the tractor. Therefore your top-link will have to be longer to get the same results.

After going to Pat's I find that my hyd. toplink is close to full extension most of the time.
Bob

Bob_Young · May 30, 2006

With regard to selecting the right top-link length: Keep in mind that if you go to Pat's EZ-Hitch, it'll move the implement about 3" further back from the tractor. Therefore your top-link will have to be longer to get the same results.

After going to Pat's I find that my hyd. toplink is close to full extension most of the time.
Bob

Slamfire · Jun 1, 2006

( ( Here's a less expensive, although harder to use alternative. )
Nothing came up but a bland page. Recheck your URL
John )

I don't know it worked for me, just now.

The discusson was in customization and was entitled "ratchet jack for top link". /forums/images/graemlins/confused.gif

Slamfire · Jun 1, 2006

( ( Here's a less expensive, although harder to use alternative. )
Nothing came up but a bland page. Recheck your URL
John )

I don't know it worked for me, just now.

The discusson was in customization and was entitled "ratchet jack for top link". /forums/images/graemlins/confused.gif