Hydraulic test harness

   / Hydraulic test harness #1  

jbrukardt

Bronze Member
Joined
Jul 20, 2012
Messages
78
Location
Maryland
Tractor
none
Thought id share my plans for a hydraulic test harness for those of you wishing to do a quick test of your hydro system.

My tractor is a Jinma 224, which i wasnt sure was operating at maximum hydraulic potential as the loader lift seemed a little weak. So knocked together a 5000 PSI test harness to check.

Pioneer Quick Coupler:
$21.00
Pioneer Quick Coupling, 1/2 in. Double Acting Sleeve Set - For Life Out Here

5601-08-08-08
1/2" NPTF Male x 1/2" NPTF Male x 1/2" NPTF Female
$8.67

5406-08-04
1/2" NPTF Male x 1/4" NPTF Female
$1.05

AFC-BRACKET Panel Mounting Bracket
$5.71

AFC-5M-25RC
Rear-Mounted Pressure Gauge, 0 to 5,000 psi
$18.96

5000-04-04
1/4" NPTF Female x 1/4" NPTF Female
$0.79

30 inch 1/4 5000psi hydraulic hose
Amazon.com: Apache 9839966 1/4" x 3" 2-Wire Hydraulic Hose Male x Male Assembly: Industrial & Scientific

Crank all these together to three rotations past finger tight, drop the gauge into your dashboard somewhere you like, and hook it into the QC right off the hydraulic pump output. Voila.. hydraulic pressure check you can view during using the loader/etc


KxDcw4J.jpg
 

Tractor & Equipment Auctions

(2) 330 GALLON POLY TOTE (A51248)
(2) 330 GALLON...
UNUSED MOWER KING 72" HYD BRUSH CUTTER (A51248)
UNUSED MOWER KING...
2016 R and R Products 331 LP Reel Mower (A51691)
2016 R and R...
2013 WABASH DVCVHPC 53FT DRY VAN TRAILER (A53426)
2013 WABASH...
199049 (A51243)
199049 (A51243)
2006 Ford Explorer 4x4 SUV (A51694)
2006 Ford Explorer...
 
Top