Hydraulic pump ID

[Arkhermit]

I have a two section pump,it is Cross brand and has 2479 stamped in the mounting flange. I have emailed the MGR but no responce. The inlets are 1" I looked on one site at a pump that looked about like this one and it said 40 gpm per section. I am building a firewood processor and need to run Hyd saw and two motors for convyers plus splitter.

 

[Arkhermit]

Well i bombed on this deal I guess. I will just build it and see if it works. To clarify I didn't ask any questions and the inlets are actually 1 1/2". I wanted to find out some info on this pump and then a motor. BUT ?

 

[Mgrove]

You can open the pump, and measure the internal dimensions, then go here http://www.surpluscenter.com/techhelp.asp?UID=2009022623492262&catname=hydraulic. They have a conversion chart to show what size it is. I would guess it to be at least a 20gpm pump, and most likely larger.
Max

 

[BILL_K]

Call Surplus Center with the brand and number and theywill be able to help you.

BillK

 

[Arkhermit]

I emailed surplus center with the info. They said what I thought was a motor was probably a pump, needed more info, sent it, haven't heard anything for several days. Didn't have a clue about the Cross two section pump.