Grapple Hydraulic problem
- Thread starter Crescent
- Start date
- Views: 983
leonz
Super Member
Which Land Pride Grapple? There are ten of them.
Which brand of third valve kit?
DO you mean the counterbalance valve??
Its possible that you have the hoses reversed,
actually its most likely the cause as the oil is only
supposed to flow through the third valve to the function
and then back to the tank.
Is your loader equipped the the single stick gimbal control
for the bucket tilt and loader raise and lower function?
You will probably be better off using the rear remotes if you have a free pair as the gimballed loader valves are not the greatest things to use for loader mounted attachments as these valves wear and the gimbal control springs weaken.
Which brand of third valve kit?
DO you mean the counterbalance valve??
Its possible that you have the hoses reversed,
actually its most likely the cause as the oil is only
supposed to flow through the third valve to the function
and then back to the tank.
Is your loader equipped the the single stick gimbal control
for the bucket tilt and loader raise and lower function?
You will probably be better off using the rear remotes if you have a free pair as the gimballed loader valves are not the greatest things to use for loader mounted attachments as these valves wear and the gimbal control springs weaken.
Last edited:
