Hydraulic Plumbing

[Cavalry]

I have a Kubota L345DT with a loader. I want to add a rear valved remote and a remote for a backhoe.
My tractor from the factory is plumbed oddly. The pump feeds the 3P and from there feeds the loader. My loader valve has a PB but is not being used.
I was thinking I can get a single spool valve with PB and put that under the seat inline with the loader feed. That would take care of the valved remote and still powering the loader.
This leaves me with power for the BH. I could run a hose from the loader PB back to the hoe.(more hose!). I really did not want to use the valved remote with something to hold the valve. Ideally I would have it come off somewhere under the seat with the other valve.

What options are there?

 

[kennyd]

Sounds like you have it figured out...Just need to make sure you can get the PB plug for you loader valve. Then extend that line to the rear to feed the new valve and the backhoe.