Hydraulic oil top off

   / Hydraulic oil top off #1  

8n Nut

New member
Joined
Mar 26, 2011
Messages
10
Location
Cosby, TN
Tractor
Ford 8N, Ford Jubilee, Ford 2810
Recently got a 53 Ford Jubilee that needs its hydraulic oil topped off. Can I fill the fill inlet by the gearshift and expect it to go to all 3 areas thnat require hydraulic oil e.g. transmission, differential, and pump. It has only 1 hydraulic oil dipstick so I am assuming the 3 sections are connedted and overflow into each other. Thanks for helping. 8n nut
 
   / Hydraulic oil top off #2  
Sorry.. don't work that way.

Did you notice that theye are 2 other fill locations? One under the front left of the seat.. and one behind the right rear of the seat.

trans is a single sump.

hyds is a single sump

diffy is a simgle sump.

PS.. I would advise against using plain hyd oil. A UTF oil meeting ,2c134 specs ( most all do these days ), is the preferred choice.

hyds has a dipstick.

diffy has a check plug left side of pto shaft.

trans has a check plug. right side of trans, about where yer heel rests, above the running board level. it's a plug not a bolt.. DO NOT remove any bolts from the side of the tranny or you will be posting back with even more questions.. :)
 
   / Hydraulic oil top off #3  
A jub manual would help cause there's a lot of changes between the jub and 8N. Welcome to the world of live hydraulics.

Kirk
 

Tractor & Equipment Auctions

PALLET OF (14) CAT WALK STEPS (A53843)
PALLET OF (14) CAT...
2019 INTERNATIONAL 4400 SBA 4X2 SERVICE TRUCK (A51406)
2019 INTERNATIONAL...
ASSET DESCRIPTIONS & CONDITION (A54607)
ASSET DESCRIPTIONS...
2019 New Holland Workmaster 95 MFWD Compact Utility Tractor with 632TL Loader - Poultry Special (A53473)
2019 New Holland...
1269 (A50490)
1269 (A50490)
Crosley 10ft Hydraulic T/A Dump Trailer (A50323)
Crosley 10ft...
 
Top