Hydraulic line adapter question

[Bayou1535]

The tractor side/ female rear remote is 1/2, it read pioneer 4250. The male end on the hydraulic line appears to be 1/4 body-0.56 ISO5675. I know my terminolgy is off as I'm new to hydraulics so bear with me.

Sportsman762, I believe that would work if I replaced the lines but I'll just get adapters.

Midniteoyl, I believe I will need 1/4 female to 1/2 male adapter as the male end appears to measure 0.56 from looking at the chart

Ericm979, that makes sense, thank you

 

[Bayou1535]

I went to the shop today and took both lines with me. I talked with the fella and male end was 1/4 body and had the "old" JD end on it with a o-ring. Since the lines were 6' too long as it was, we went ahead and cut them and put new ends on with a adapter to 1/2. Came home and put them back on and everything is peachy. $40 dollars to do it right with both adapters, cut to length and new ends. I appreciate everyone's help and thank you.

 

[Midniteoyl]

Nice