Hydraulic fittings and hoses

[kbone1]

Hey guys,

I got a question; I am in the process of converting my ZL-30 FEL on my JM 354 to a Prince loader valve. I am buying Metric female to NPT male converter couplings, should I use ½ or 3/8 inch hose? Also if anyone has done this, has the same type/style of tractor and has some pointers, please let me know.

I would also like to hear from anyone who has replaced their Quick Connects. What type, style, size did you replace them with?
Was it hard to do?

Thank you,
kbone1

 

[Affordable]

Kbone, we have a conversion kit already with a Koyker type valve with float, joystick,6- new hoses with JIC fittings,,new mounting bracket,adaptor fittings,just bolt up and your ready to go,you can install the complete new valve kit in about a hour.Did you already buy the Prince valve?? This is a better valve and set up.We use 1/2" hoses

Tommy
Affordable Tractor Sales Co.,
AFFORDABLE TRACTORS

 

[MadReferee]

Based on your hydraulic flow, 3/8" hoses should be adequate. Anything bigger is probably overkill. Make sure you use 2-wire hoses.

Adapter fittings can be had from Discount Hydraulic Hose.

If you don't already have a valve, then Tommy's kit is a good deal.