Hydraulic Drive Shaft

[Inolaway]

I have a Massey MF150 Perkins diesel with a front end loader. The shaft that drives the pump, which is mounted on the front of the tractor just in front of the front axel, stripped the threads to the hydraulic adapter plate mounted on the crank pulley. The adapter plate is a three hole mount, with 3/4 left handed thread shaft hole. The shaft is 15" 7/8 long 13 spline.

My problem is I can find the plate all day long on the internet but I cannot find a shaft that is 15 7/8 long with a 3/4 left handed thread. The longest I can find is around 12 inches. Does anyone have a part number for the shaft?

Thank you!!
Inolaway

 

[GMIslander]

Someone with a metal lathe could spin that off in jig time. Know any machinist or hobbyist.

 

[Inolaway]

You mean take the 7/8 size down to 3/4 with the same thread? Those shafts are around 150 bucks or more!