Loader Hydraulic coupler seal

[spox]

I was re-attaching my loader on the b2630 when the o-ring inside the female coupler fell to the ground and disappeared! Does anyone know where I can get a replacement?

 

[KennyV]

Pull one out of the other coupler, go to your closest hardware store & match it... get a couple extra, you may need them.

 

[leonz]

I was re-attaching my loader on the b2630 when the o-ring inside the female coupler fell to the ground and disappeared! Does anyone know where I can get a replacement?

Be sure to obtian the exact o-ring because if you do not you will have a world of problems with hot hot oil.

I am unsure if it is an BSP O-ring British standard Pipe O-ring with the Blue Dot, but you must obtain the right o ring in any case any farm equipment dealer will have the right size o ring including the Kubota dealer you deal with.

It will be faster for you to call thier service department for the right size O ring if they are not within a reasonable driving distance.

leon

 

[spox]

thanks guys... looks like i'm heading over to the dealer.

 

[Usta]

Hardware stores have o rings for all types of general uses.
Get rings from a dealer to make sure it is a ring made for hydraulics.

 

[Deano]

AS3209-015 or M83248/1-015 is the one that will fit. The ones at the hardware store will not. The dealer does not sell just that o-ring. Or at least mine didn't!!

Deano

 

[KennyV]

Hardware stores have o rings for all types of general uses.

They certainly do... including hydraulic uses...

I would go to the closest or most convenient place that had what I needed. KennyV

 

[KennyV]

You can also include hydraulic hose suppliers in your places to find the o-ring you need for a particular application, call around, lots of help using your phone. KennyV

 

[KennyV]

M83248/1-015 is the one that will fit. The dealer does not sell just that o-ring. Or at least mine didn't!!

Deano

You can also get that o-ring on line for 8 cents... at : oringsUSA

 

[spox]

Thanks all! The dealer said they dont sell the orings, that I would need to buy the whole coupler.

I'm going to try that online site... thanks!