hydraulic 3 point lift

   / hydraulic 3 point lift #1  

daddyimp

New member
Joined
Mar 13, 2011
Messages
1
Tractor
Ford 850
Lift will not go up all the way, and when it goes as high as it will it surges up and down until I put another 200 lbs with a grader blade attached. Any one have any ideas. Thanks kenn
 
   / hydraulic 3 point lift #2  
hi daddy
we need to know what the machine is, model, year etc.
simonmeridew
 
   / hydraulic 3 point lift #3  
if this is his ford 850 from his profile, then there could be a few reasons.. but most will circle around his cam follower pin ( and or cam ) being worn down and needing repalced ( pin ) and built up ( cam ).. plus it will then need a linkage adjustment using the alternate method NOT using the nuday tools as outlined in the service manual.

I bet manipulating the draft lever makes the lift go to different heights too.

as for the bobbing.. that is usually leakdown and circuit regen thrut he unload valve. leaks are usually at piston seal to cyl.. though could be in cyl to top cover.. at safety/relief/check valves too.

I&T fo-20 manual will cover this repair fully...

soundguy
 

Tractor & Equipment Auctions

2011 Ram 1500 4x4 Crew Cab Pickup Truck (A53422)
2011 Ram 1500 4x4...
MASTER FLOOR HEATER (A53843)
MASTER FLOOR...
2019 CATERPILLAR D6K2 LGP CRAWLER DOZER (A52706)
2019 CATERPILLAR...
2025 IR UNUSED Cleanout Bucket (A53117)
2025 IR UNUSED...
2008 New Holland L175 (A47477)
2008 New Holland...
2012 John Deere 7230R (A53473)
2012 John Deere...
 
Top