rdavisjr87
New member
I would like to add hyd. top link and side link to a kubota MX 5100 can any one help me ?
Hyd. top link help
- Thread starter rdavisjr87
- Start date
- Views: 1045
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,641
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
$600 + shipping for a complete "TnT" kit. That's top link & side link built with 2 1/2" dia cylinders, hoses with quick connect ends and hydraulic flow restrictors. Assuming that you already have the rear remotes.
Email me at Fit Rite Hydraulics
Email me at Fit Rite Hydraulics
OP
rdavisjr87
New member
Yes the tractor is at the dealer getting 3 rear remotes installed is that Cat 1 or cat 2 kit? Thanks for the help . Tell me more about it and where can i order it From?
OP
rdavisjr87
New member
Sorry now i see Fit right after looking again ! do you offer 3 function for the front end loader as well? im adding all the goodies before I hit the hay feilds with it.
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,641
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
Your top link is a cat 1-2. That is it is cat 1 at the tractor end and cat 2 at the implement end. For your size of tractor I build the links with 2 1/2" dia cylinders with 1 1/2" dia rods. Your top link would have a working length of 22"-34". Your side link would be built so that you have an equal amount of tilt to both sides. 3/8" hoses with 1/2" male AG quick connect ends and hydraulic flow restrictors to slow the fluid down so that it is easier to make the hydraulic link adjustments. Yes I can get you your 3rd function kit.
Contact me at the Fit Rite Hydraulics.