swampyankee
New member
Can anyone tell me how to hook up the hyd. valve to run a grapple on the bucket of 3510HST Mahindra. Can I just T off the bucket valve to a valve to run the grapple? Thanks /forums/images/graemlins/confused.gif
Grapple Hyd. Hook Up For Grapple On a Mahindra
- Thread starter swampyankee
- Start date
- Views: 3027
kennyd
Advertiser
You cannot "T" off the loader lines. You will have identify the "Power Beyond" lines to the loader valve, and put a new valve that is set up for Power Beyond in series with the loader valve.
The other option is a Electric Diverter Valve, that will direct fliud flow to either the curl cuircit or the grapple. Either option will cost around $300.00-$350.00.
If you do a search on "Diverter Valve" you will find a number of posts dealing with instalation including my own I use for a snowplow and a grapple in the future. Be sure to set the "Date Range" to "All Posts", as it defaults to only one week.
The other option is a Electric Diverter Valve, that will direct fliud flow to either the curl cuircit or the grapple. Either option will cost around $300.00-$350.00.
If you do a search on "Diverter Valve" you will find a number of posts dealing with instalation including my own I use for a snowplow and a grapple in the future. Be sure to set the "Date Range" to "All Posts", as it defaults to only one week.
jpm
Platinum Member
Doesn't the 3510hst come with rear remotes? That is the easest way .
