windy acers
Silver Member
Fence in the tractor barn as part of the cattle feild and include a bull or 2 and a warning sign attack cattle in feild. Worked for me over 10 years!!!!!
I checked into insurance and it is $250/year for a 14K machine through my insurance company which seems very high (I plan on shopping around more next week).
1. Theft of my tractor is covered by my homeowner's policy, if I park it on my own property. It is not covered off my property (there goes parking at your neighbor's). Check your homeowner's policy with your agent.
2. The ideas discussed will mostly cost a lot more than $250 and will be much less effective than an insurance policy.
3. My dealer recommended a locking fuel cap to prevent vandalism, and covering the machine with a tarp while I was gone. These will slow kids down, but won't do much against a determined adult. Park it in the deepest woods you have and cover it with a camo tarp. It won't disappear, but it won't stand out like a new tractor. The idea is to make it look like an old tractor from a distance.
My thinking is that the insurance is cheap compared to the tractor, and can not be defeated by a thief. Plus, if someone should happen to be injured stealing the tractor, any extraordinary steps you took to protect it could cause a legal liability -- insurance will not do this.
While the sea containers are a great idea, they start at $2000 around here and could be as high as $4000. Plus another $500-1000 to outfit it it the way you want. That buys a lot of insurance.
Here's something that really works, but it's totally off the wall. Here in Pennsylvania we have a lot of gas wells, some of the wells need a pump-jack that is powered by a 12hp or so Honda engine.
They were stolen as soon as it was replaced until our shop mechanic came up with an idea:
He spray-painted the engine with all kinds of ugly colors, purple, pastel, lime green, rust color, etc. to the point it looked so ugly you couldn't look at it.
Bingo!!! None of the engines that were painted ugly were stolen!!
I know it's really going overboard, but the point here is that it did deter theft.
I couldn't imagine "ugly-painting" my TN65; but then again, it probably wouldn't be stolen.
Thanks for all of the replies. I think I have come up with a solution. I am planning to build a 10x16 pole shed to keep it in (gable roof, totally enclosed) and just get insurance.
That way, a locked barn will probably keep out kids and vandals, and if a thief gets after it, that will be covered by insurance.
Thanks again.
Joseph
I would be as worried about kids/morons dumping sand etc in the fuel or oil fill holes.
These machines are not like full size constuction equipment where all that type of stuff is lockable.
On one of the jobs I was on, kids dumped sand in an excavator engine and hydro tank, the machine ran a couple of minutes before things started to go very wrong.
The owner lost the key years ago so he never locked the fuel/oil caps.
After he had it flushed and repaired he got new locks and keys.
Another favorite up here is throwing rocks thru the glass, most all the construction machines that are left on the jobs all have removable glass shielding of some type.
Thanks for all of the replies. I think I have come up with a solution. I am planning to build a 10x16 pole shed to keep it in (gable roof, totally enclosed) and just get insurance.
That way, a locked barn will probably keep out kids and vandals, and if a thief gets after it, that will be covered by insurance.
Thanks again.
Joseph
Hello everyone,
I am new to this forum. I am about to purchase a new JD 50hp machine and will be keeping it in a rural location. I have been going back and forth on how to secure it from theft.
I checked into insurance and it is $250/year for a 14K machine through my insurance company which seems very high (I plan on shopping around more next week).
So, I have been trying to figure out how to best secure it. I thought about all the usual ignition/starter/fuel disable schemes, until I talked a fellow at a dealer who basically blew all my theories.
He told me that a person from my home town had just had his tractor stolen with a bunch of disable stuff in place. I asked him how and he told me the thief fed it ether through the intake and got it to fire enough to get it on a trailer, while shorting from the battery to the starter terminal (bypassing any anti-theft circuits on the starter side or fuel system side).
So, after hearing this, I realized that there is no way to disable the fuel or ignition system (besides maybe taking the starter home with you). Not to mention the risks of someone just winching it up without starting it.
So, I have come up with some ideas to prevent theft. I was hoping folks could provide some feedback as to whether or not I would be wasting my time:
1.) Park it in the woods, out of sight from the road.
2.) Rig the back and front tires out to row crop width to keep it from easily being loaded on a standard lowboy trailer.
3.) I designed a bracket made out of 1/4" plate that will securely hold the front axle in place. The brackets will look like an upside down "L" and allow the tractor to be backed into place. The "L" will have another hinged "L" piece that will lock into place with a standard lock. The trick will be that the 2nd hinged piece will have a 1/4" plate protection box where the lock will be that only has a hole big enough to insert your fingers and key to unlock it and loop it in and out of the catches within that box (that way the lock is protected from bolt cutters, grinders etc). The whole assembly will be anchored in concrete that goes several feet deep. That way, the thief will basically have to bring a torch to the site to cut through the brackets (will have one on each side of the front axle between the wheel and engine).
Any opinions on my ideas?
Thanks,
Joseph