how to: adjust throttle lever 2810 [pics]

[Texan4Life]

I have always had an absurdly stiff throttle lever on our 2810 gear. so I finally got around to fixing it.

Take off steering column covers. 3 bolts on the bottom, 2 bolts on top. They are #3 phillips head.

http://i40.tinypic.com/1zv4y6b.jpg

http://i40.tinypic.com/2cggd9f.jpg

Unplug the PTO button so you can get the panel out of your way:

http://i44.tinypic.com/2vbq1oo.jpg

Here can can see the spring controlling the throttle lever tension. 2 bolts hold it to the steering column. remove those.

http://i39.tinypic.com/mm962v.jpg

assembly removed and ready to work on. you can see how the spring is fully compressed!

http://i44.tinypic.com/11brink.jpg

here it is dissembled:

http://i40.tinypic.com/9url8m.jpg

Here it is back together minus one washer:

http://i43.tinypic.com/303h1f8.jpg

And if your throttle was to lose, you can add a washer assuming your large black wear washer was still in good shape.

When I reassembled I added some dielectric grease to the PTO plug. Keeps out moisture and prevents corrosion.

http://i39.tinypic.com/sv6sg8.jpg

I also used some anti seize on the bolts since one of mine was rusted so tight it broke off and i had to drill and tap the nut it screwed into.

 

[skipmarcy]

Good post !! I'll have to get into my 4110 and tighten 'er up a little. Mine was always stiff for years too but now mine won't hold steady while cutting the grass - the throttle drifts down very slowly and I have to pull it back up every so often while cutting, a little irritating at times. Have been planning to take a look at how it operated but now I know !!

 

[Texan4Life]

Good post !! I'll have to get into my 4110 and tighten 'er up a little. Mine was always stiff for years too but now mine won't hold steady while cutting the grass - the throttle drifts down very slowly and I have to pull it back up every so often while cutting, a little irritating at times. Have been planning to take a look at how it operated but now I know !!

Glad it could help!

I have a PTO seal replacement how to in the works also.