How Much Damage to the Kubota?

   / How Much Damage to the Kubota? #12  
I have never heard of pto brakes. I have always had older tractors on pto work. When did pto brakes come in?
 
   / How Much Damage to the Kubota? #13  
I have never heard of pto brakes. I have always had older tractors on pto work. When did pto brakes come in?
JD tractors with 2 cyl engines with independent pto's began having pto brakes in 1956 which continued into the new Generation 10 series tractors in 1960
 
   / How Much Damage to the Kubota? #14  
I highly doubt it has any damage to the PTO clutch in 200 hours even if he didn’t lower the RPM to start and stop it.
 
   / How Much Damage to the Kubota? #15  
I’d probably be more concerned about starting a heavy PTO load during really high RPM.
 
   / How Much Damage to the Kubota? #16  
I have never heard of pto brakes. I have always had older tractors on pto work. When did pto brakes come in?
Farmall 400 had one in 1950's
 
   / How Much Damage to the Kubota? #17  
I’m guessing that the line on the dash the power is referring to is the 540 pto speed line (about 2300 RPM if I remember correctly). I doubt that anything is wrong at this time with the low hours on the machine. I have done this once or twice myself and everything is fine.
 
   / How Much Damage to the Kubota?
  • Thread Starter
#18  
A tiller "out of the ground" isn't much of a load on a tractor PTO clutch...

As for the pto brake, IF, I had one wore out, I'd leave it wore out! I hate the things!

SR
Can you explain more on why? I can't think of a downside to having a working pto brake.

@haydude - is that because if you wore the clutch out you couldn't use you attachments effectively, where as a worn out brake doesn't stop you from using them? Is that why you said that? I agree if that's what you meant....

Thanks for the feedback guys. I think I'll have him hook his shredder up when I go look and see if I can tell anything. It's a basically new tractor, and for what he wants, I want it all to work as it's supposed to.

I bet lots of homeowners/hobby farmers who go out and buy a new tractor are putting undue wear on their machines in 1 way or another. This tractor also has hooks welded on the very outside edge of the bucket..... I've explained why both these things are a bad idea and he shouldn't do that to his soon to be delivered new Kubota....
 
Last edited:
   / How Much Damage to the Kubota? #19  
I’m guessing that the line on the dash the power is referring to is the 540 pto speed line (about 2300 RPM if I remember correctly). I doubt that anything is wrong at this time with the low hours on the machine. I have done this once or twice myself and everything is fine.
Its one thing to do it with a hay rake, but much more serious if running a rototiller or auger buried in dirt.
You can overheat and warp the clutch packs instantly.
I did it and couldnt believe it.
 
   / How Much Damage to the Kubota? #20  
A tiller "out of the ground" isn't much of a load on a tractor PTO clutch...

As for the pto brake, IF, I had one wore out, I'd leave it wore out! I hate the things!

SR
Yeah they really don't matter all that much compared to burning up the clutch packs on start up.
 

Tractor & Equipment Auctions

2007 Reitnouer 40 Ton T/A Heavy Haul Flatbed Trailer (A52377)
2007 Reitnouer 40...
2008 KOMATSU PC200LC-8 EXCAVATOR (A52706)
2008 KOMATSU...
2012 JOHN DEERE 160G LC EXCAVATOR (A52705)
2012 JOHN DEERE...
UNUSED LANDHONOR HPF-11-3000G HYD PALLET FORKS (A54757)
UNUSED LANDHONOR...
Mohawk 12,000lb Two-Post Electric Auto Lift (A54811)
Mohawk 12,000lb...
2012 Volkswagen Passat Sedan (A55758)
2012 Volkswagen...
 
Top