cdf
New member
Need to replace the starter on an International 1586 with a cab. Have NO CLUE as to how to go about removing it. HELP!!!!!!!!!!!!!!!!!!
How do I remove the starter on an International 1586 with a cab?
- Thread starter cdf
- Start date
- Views: 8270
pjbci
Platinum Member
- Joined
- Feb 10, 2012
- Messages
- 780
- Location
- Summit. Ms
- Tractor
- JD 4840, Deere 5075e, 450j, Cat D4k2, Kobelco 160, Volvo EC140el, deere 310, komatsu D31px22, IH 1486, MF 135, MHF TO35
Pull up the floor plate of the cab. Its right there where u can get to it. If u have it rebuilt, be sure to tell em its off of an international. The starters turn backwards from most since they mount behind the flywheel instead of in front.
pjbci
Platinum Member
- Joined
- Feb 10, 2012
- Messages
- 780
- Location
- Summit. Ms
- Tractor
- JD 4840, Deere 5075e, 450j, Cat D4k2, Kobelco 160, Volvo EC140el, deere 310, komatsu D31px22, IH 1486, MF 135, MHF TO35
Oh yeah, once u get to it. Just disconnect the wires, after you remove the battery cables from the batteries, then theres just 3 bolts holding the starter to the bellhousing. A 9/16 wrench fits em.
