How about a Rake/Grapple that doesn't need 3rd remote?

   / How about a Rake/Grapple that doesn't need 3rd remote? #1  

jlukem

Member
Joined
Oct 18, 2010
Messages
40
Location
Segno, TX
Tractor
Mahindra 3016
Here's what I'm thinking..

A stacking rake FIXED to the lift arms of the FEL. The bucket rams then connect to the grapple thumbs and close as the bucket would tilt.

No extra remotes/functions required. This oughta drop the cost of the rake/grapple by at least the amount of $ required to add the extra functions to the little CUTs that don't have it.

I emailed a fab shop by my house to see what they say. I'm going to start with a rake from "rake sales" on highway 59 and see what I can do for the grapple.

Or.. does someone already make this??

-Luke
 
   / How about a Rake/Grapple that doesn't need 3rd remote? #2  
I think you're going to miss being able to tweek the curl/uncurl for slippng it under a load, picking off a load from above, stabilizing the load for transport, or using it at an elevated position.
 
   / How about a Rake/Grapple that doesn't need 3rd remote? #3  
I agree, I think it would only really be handy for brush or limbs.

The bucket angle of a FEL is too "level" at center IMO. Backhoe solid mounted thumbs work because of the way the boom hangs down over objects, kind of like a claw.
 
   / How about a Rake/Grapple that doesn't need 3rd remote? #4  
I've gotten by quite nicely with a set of bucket forks with 2x4 standards placed in holders at the back of the forks...
Curling the bucket allows you to get a lot of material...
Very inexpensive solution versus a grapple...
Especially on a small capacity loader like mine...
 
   / How about a Rake/Grapple that doesn't need 3rd remote? #5  
   / How about a Rake/Grapple that doesn't need 3rd remote?
  • Thread Starter
#6  
Srs - that's exactly what I was thinking.

I don't think forks will work with my standard bucket. I have a lot of Yaupon to remove and often the root ball is still stuck in the ground when I go to haul it off even though it's laying on its side. I'm moving things to burn piles and trying to have less dirt in the piles.

-Luke
 

Marketplace Items

Toyota SR1-BET35 3,500 LB Stand-On Electric Forklift (A59228)
Toyota SR1-BET35...
UNUSED RAYTREE RMLS18T-18 TON HYD LOG SPLITTER (A60432)
UNUSED RAYTREE...
2011 GENIE Z-45/25J ELECTRIC BOOM LIFT (A60429)
2011 GENIE...
TOPCAT HCRC 72" HYD BRUSH CUTTER (A52706)
TOPCAT HCRC 72"...
2008 MOTIV ALUMINUM TRAILER CO. 32 TRI AXLE GOOSENECK ENCLOSED TRAILER (A58214)
2008 MOTIV...
UNUSED RAYTREE RMPP680 HYD POST POUNDER (A60432)
UNUSED RAYTREE...
 
Top