Hot hydraulic fluid + loss of cylinder pressure

   / Hot hydraulic fluid + loss of cylinder pressure #1  

Pete in FL

New member
Joined
Jun 13, 2007
Messages
11
I've got a 3 pt hitch log splitter running off the loader control valve system on a B7510 Kubota. Been working fine for several years. This year after about an hour I noticed the hoses are real hot and the cylinder's lost both speed and power. FEL works fine. Fluid level is normal. Any thoughts would be greatly appreciated.
 
   / Hot hydraulic fluid + loss of cylinder pressure #2  
Check cyl seals for bypassing, and check the return filter.

Put a hyd gage in the IN port and check the pressure.
 

Tractor & Equipment Auctions

23169 (A50324)
23169 (A50324)
Kioti DK 35, 4WD, Quick Attach Loader with Bucket  (A52384)
Kioti DK 35, 4WD...
2010 VANGUARD 53x102 DRY VAN (A53426)
2010 VANGUARD...
UNUSED CFG MX12RX EXCAVATOR (A51247)
UNUSED CFG MX12RX...
2024 JOHN DEERE FC 10 R LOT IDENTIFIER 79 (A53084)
2024 JOHN DEERE FC...
(5) GOLF CART CANOPIES (A51248)
(5) GOLF CART...
 
Top