HELP YANMAR YM2610

[lynn_florida]

Can anyone help me out with the torque settings on the head bolts and tightening sequence on the 3 cylinder in my 2610 thanks /forums/images/graemlins/confused.gif

 

[lens12]

Start at the middle & work your way out. I don't have the specs , but they should be the same as JD950.

 

[1danny]

This is what I have for the Yanmar 3T80 engine.

Three steps.

1st 45ft lbs
2nd 88ft lbs
3rd 118 - 133ft lbs.

See attachment

Danny

 

[lynn_florida]

Thanks Danny that was what I was needing was the torque specs for the head bolts appreciate the help LYNN /forums/images/graemlins/cool.gif