Help. The hydraulics quit working

[saxon]

On the BX2230 HST, the hydraulics for the rear totally quit working and the FEL hydraulics work but not normally??
The transmission is full of fluid.
I worked it hard the last time I run it 2 days ago, but not that hard??
What all can I check?
Thanks

 

[BeezFun]

I'm not familiar with that model, when you say the "rear totally quit working", do you mean there is a remote rear hydraulic valve that isn't functioning? Or do you mean the 3pt isn't working? Describe what you mean by the FEL is not functioning normally. Does the transmission work properly, so it goes forward and backward normally?

 

[saxon]

The HST trans works fine in forward and reverse.
I do mean the 3 pt hydraulics are not working, at all.
The FEL will work but just barely creeps up, and to go down the lever has to be pushed all the way forward till it moves past a detent.
The bucket roll works right though.

 

[tungularafishcamp]

sounds like a loose quick connect, might want to check them

 

[BeezFun]

sounds like a loose quick connect, might want to check them

+1
Especially if you just reconnected the FEL

 

[saxon]

Hallalooyah
There was a QD fittin up near the lever that snapped in placed when I pushed on it.
Now everything works fine.
thanks Tunga