Heater issues

/ Heater issues #12  
Regardless of part numbers and open station or not; if one takes a t-stat and drops it in 185+ degree water you will see if the stat in use is opening all the way or just partially. If partially then it is not working properly. Replace with an OEM or aftermarket to the same rating as original.
 
/ Heater issues
  • Thread Starter
#13  
Gotta be stuck open cause I can't even get it up to operating temp anymore.
You would think that that big ol 8 foot snow pusher and the 3-4 inches of snow we got last night would warn it up. Service guy is coming to my shop tomorrow so gonna have heat and defrosted windows soon!!
 
/ Heater issues
  • Thread Starter
#14  
New T-stat in today with great results. Never seen the temp gauge up to where it is now. Seems it had the wrong one in it from the get go.
In think it said 74 degrees on the existing one.
 
/ Heater issues #15  
New T-stat in today with great results. Never seen the temp gauge up to where it is now. Seems it had the wrong one in it from the get go.
In think it said 74 degrees on the existing one.


yeiks... well glad its all working out
 
/ Heater issues #16  
New T-stat in today with great results. Never seen the temp gauge up to where it is now. Seems it had the wrong one in it from the get go.
In think it said 74 degrees on the existing one.

You should see lower fuel consumption too now. Diesels don't like to run cold.
 

Marketplace Items

(INOP) 2008 FORD CROWN VIC (A59823)
(INOP) 2008 FORD...
ALLMAND LIGHT TOWER (A60736)
ALLMAND LIGHT...
20' DOUBLE AXLE INDUSTRIAL TRAILER (A59823)
20' DOUBLE AXLE...
Cushman Electric Cart (A55851)
Cushman Electric...
Snap-On Southern Thunder Edition 24-drawer tool box (A61307)
Snap-On Southern...
CFG Inudustrial MH12RX (A60463)
CFG Inudustrial...
 
Top