Icf
New member
Always worked fine and last night I went to plow snow and they don't come on. 4 ways still work fine. Thinking it is not bulbs since there are two and unlikely they died in unison? What should I do to diagnose ?
Headlights not working on JD 2210
- Thread starter Icf
- Start date
- Views: 4185
-
- Tags
- john deere 2210
DFB
Elite Member
- Joined
- Dec 7, 2000
- Messages
- 2,897
- Location
- Southern VT, Southern ME
- Tractor
- John Deere 4100 HST /410 FEL, R4s
Did you check for a blown fuse?
pedalstomper78
Gold Member
Blown fuse, bad switch, or a bad relay would be the three main culprits. I would check the fuse first.
If it is the fuse, I would check for other wiring issues. Fuses don't pop for no reason usually.
If it is the fuse, I would check for other wiring issues. Fuses don't pop for no reason usually.
creekbend
Super Star Member
I agree with the others. Your Operator's Manual should show you where the fuses are located, and which fuse goes with a specific function. If it is a blown fuse, always replace with one of the same capacity indicated in your Operator's manual.
I found a blown 20amp fuse and replaced it. The fuse box is a lame little plastic box with no protection from the elements so I have given it a wrap in electrical tape to keep it sealed. Maybe it was water that caused the blown fuse. For now I will wait and see if the fuse blows again. Thanks for the tip. I enjoy DIY work on my tractor but I am not super technical. Now I know where to come for help!
