hazards/4 ways not working????

/ hazards/4 ways not working???? #1  
Joined
Sep 29, 2008
Messages
12
Location
Middleton,MI
Tractor
Bobcat toolcat
going to check the fuses in the AM but they just quit working were working fine and just quit while they were on and working any ideas besides the fuses, any help would be great.
 
/ hazards/4 ways not working????
  • Thread Starter
#3  
I checked the fuses and all were fine, but I noticed the front right turn signal bulb is out do you think that would cause it not to work, the blinkers don't work either
 
/ hazards/4 ways not working???? #4  
My flashers stopped working last year. Was a simple fix. The flasher control unit is a small, silver metal can that's attached to the wiring harness under the dash. It's not too hard to find...it's near the center of the dash. IIRC, it's a standard, two-prong device that you can buy almost anywhere (e.g. NAPA, Schucks, Checker, Autozone,...).
 

Marketplace Items

1024 (A63111)
1024 (A63111)
2008 Kaufman Wedge Trailer (A62613)
2008 Kaufman Wedge...
2025 IRET13 Electric Tricycle (A64194)
2025 IRET13...
Decorative Mermaid Light Post (A61574)
Decorative Mermaid...
2021 UTILITY VS2DX 53FT DRY VAN TRAILER (A59905)
2021 UTILITY VS2DX...
2005 John Deere 7320 (A60462)
2005 John Deere...
 
Top