Hazard Lamp Flasher

[pyro29]

I looked through both the owners / operating manual as well as the service manual but can't find the location of the hazard flasher. I looked in the fuse box but nothing there. My hazard lamps are not working, at all, now that I've replaced the 1156 bulbs with LEDs, I'm assuming that I need to replace the thermal flasher with an electronic unit.

Anyone know where it is?

Thanks

 

[DirtHauler]

I know on my 2555 it's located on the "fire wall" behind the dash. Mine's a combo flasher meaning both the hazard and turn signals operate off the same flasher unit.

 

[JerryK]

On the 5035, you remove the four screws holding the gauge panel in and you will see it mounted on the fire wall just inside there. I changed some of my lamps to LED's, and had to install an electronic flasher in the stock flashers place. 4035 should be the same....

 

[pyro29]

Thanks guys!!!