hoofty
New member
I need to upgrade the hydraulics on the Allis. Is there a replacement pump to give more GPM to operate a loader. Is it an open system or a closed?
have an Allis 5040 in sad shape and a John Deere 401B slightly better
- Thread starter hoofty
- Start date
- Views: 2087
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,700
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
G'day Mate and welcome to TBN from Downunder.
Sorry to hear of your woes... You should re-post this over on the Allis Forum for better results from the helpful TBN community (Or Catherine will shift it for you. She's good at that.
)
Enjoy the site.
Sorry to hear of your woes... You should re-post this over on the Allis Forum for better results from the helpful TBN community (Or Catherine will shift it for you. She's good at that.
)Enjoy the site.
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,561
Welcome to the forum!
:tractor: It's true. I do like relocating threads to where they are most likely to get a response. I'm going to move your thread on over to the vintage tractors section to see if we can find you some advice.
:tractor: It's true. I do like relocating threads to where they are most likely to get a response. I'm going to move your thread on over to the vintage tractors section to see if we can find you some advice.
Harry in Ky
Veteran Member
I believe there are some options available, both through Agco, and aftermarket. If you're interested, we can discuss a few.
