Harbor Freight tools that DO suck

[whitepine2]

I don't get nearly as much heartburn loaning out Chinesium specials as I would loaning out my SKs. Also people stop asking you for tools after awhile if all you hand them is junk.

Like I said dumb as fox. I kinda stopped lending,I will go help them out with my tools,the only one that gets to use mine is my son and or someone that knows how to use the tools correctly and I get to use thiers.

 

[California]

Thank you CA. ... I also have a P&M outside wood boiler and was thinking it might be a good thing to clean the 16 tubes,what do you think about that,good,bad or no good. If that were the case I would get he better one as it would be used more often.

I have no idea if these are suitable for cleaning boiler tubes.
$259 vs $389? The $120 buys motorized feed out/in, and you might get done in half the time.

I'm cheap, for my very occasional use the lesser one is sufficient. YMMV. I see a $199 coupon for it on 'HF Coupon Database'.

 

[Diggin It]

Again, more of a policy than an item.

My store had two of the $189 drawer tool carts on Open Box/Damaged, blue ones that I wanted. On one the back was bent so that the drawer pins wouldn't release for the drawers to open. Not sure about the other, but they also said the drawers wouldn't open. They had them priced at $167, but would agree to go down to $145. Not knowing the extent of damage or how much work it would take, I wasn't willing to go more than half price. They stayed in the store. Maybe someone else will want a project at neat full price.

 

[Slowpoke Slim]

Again, more of a policy than an item.

My store had two of the $189 drawer tool carts on Open Box/Damaged, blue ones that I wanted. On one the back was bent so that the drawer pins wouldn't release for the drawers to open. Not sure about the other, but they also said the drawers wouldn't open. They had them priced at $167, but would agree to go down to $145. Not knowing the extent of damage or how much work it would take, I wasn't willing to go more than half price. They stayed in the store. Maybe someone else will want a project at neat full price.

The longer they sit there on "open box" sale, the lower the price is supposed to go. (they are supposed to continually drop the price on whatever item until it gets sold, but it's up to the individual store manager to stay on top of such things). Maybe check back in a couple of weeks?

 

[Ford850]

Again, more of a policy than an item.

My store had two of the $189 drawer tool carts on Open Box/Damaged, blue ones that I wanted. On one the back was bent so that the drawer pins wouldn't release for the drawers to open. Not sure about the other, but they also said the drawers wouldn't open. They had them priced at $167, but would agree to go down to $145. Not knowing the extent of damage or how much work it would take, I wasn't willing to go more than half price. They stayed in the store. Maybe someone else will want a project at neat full price.

You can buy them new for $169 without the damage. Harbor Freight Tools Coupon Database - Free coupons, 25 percent off coupons, toolbox coupons - 30", 5 DRAWER MECHANIC'S CARTS (RED, BLUE & BLACK)

 

[Diggin It]

You can buy them new for $169 without the damage.

See, that's the point, they're not worth that to me. I was hoping to get a damaged one for under $100 that could be fixed with some repair. It would have been for an outbuilding, so I don't need fancy.

I just can't see anybody paying more than half without knowing how much work might be necessary.

 

[mike69440]

Picture = 1000 Words

 

[California]

Chinesium!

I had a screwdriver break like that when I used it for the top of a T-handle, with not much force applied. All crystals, exposed in the break.

 

[California]

This thread seems like a good place to warn others - Not HF but Ebay:

I've ordered a lot of small purchases from China, mostly with good results, inexpensive stuff that was fairly priced.

Not this time.

80mm Mini Plastic Student Sliding Vernier Caliper Gauge

FREE Economy Int'l Shipping
Item location: Shanghai, China
Seller ships within 1 day after receiving cleared payment


Then an email

Apr 21, 2019
Your order is being shipped!

Estimated delivery: May 07 - Jun 18
Last scanned date N/A
Package location
Shipping status Shipping info received
Shipping carrier FLYT
Tracking number UB011471218PH

Ok, fine. Shanghai is civilized country, this shouldn't take any longer than other stuff I've receive from China.

Wrong. 2 months after the order, it finally arrives. Address label is on Philippines Post label, to me. Over that is pasted a near identical address label to me that indicates a China Customs declaration. Maybe a drop-ship, or the Shanghai guy orders from Phillippines after he has accumulated enough orders for a bulk purchase? WTF? 2 months from Shanghai means he didn't have in stock the items he listed.

That tracking number is meaningless. USPS shows such a # but only that 'label prepared'. # unknown at any other tracking site I can find. It is too long for China Post. I think this Ebay seller uses that USPS gimic to give the appearance an order is moving when it isn't.

The last straw was the items arrived after the 2-month (?) window to give feedback. So none of his visible feedback reflects his slow shipping.

One general lesson learned, aside from 'avoid this seller': Economy Shipping isn't the same thing as China Post, which is a government owned service intended to promote China's export capability, and relatively efficient. Shipping Carrier: FLYT. I can't find them but saw a couple of bad reviews that they are the slowest shipper that exits. Lesson: Avoid any Economy Shipping. In contrast, Express Shipping from China is fine.

Oh the 'vernier calipers'? I didn't expect much but these are just kids toys. The long marks every quarter inch are identical size so at a glance you can't recognize the unlabelled first inch mark. I thought these would be a short version of the usual 6 inch vernier caliper but instead they are miniatures of it. The metric markings are decent so these may be useful as intended, to leave with my socket and wrench sets to quickly judge a bolt head. For inch-designated wrenches, probably no better than just 'grab a few wrenches and try them all'.

Bah.

 

[Threepoint]

This thread seems like a good place to warn others - Not HF but Ebay:

I've ordered a lot of small purchases from China, mostly with good results, inexpensive stuff that was fairly priced.

Not this time.

80mm Mini Plastic Student Sliding Vernier Caliper Gauge

FREE Economy Int'l Shipping
Item location: Shanghai, China
Seller ships within 1 day after receiving cleared payment


Then an email

Ok, fine. Shanghai is civilized country, this shouldn't take any longer than other stuff I've receive from China.

Wrong. 2 months after the order, it finally arrives. Address label is on Philippines Post label, to me. Over that is pasted a near identical address label to me that indicates a China Customs declaration. Maybe a drop-ship, or the Shanghai guy orders from Phillippines after he has accumulated enough orders for a bulk purchase? WTF? 2 months from Shanghai means he didn't have in stock the items he listed.

That tracking number is meaningless. USPS shows such a # but only that 'label prepared'. # unknown at any other tracking site I can find. It is too long for China Post. I think this Ebay seller uses that USPS gimic to give the appearance an order is moving when it isn't.

The last straw was the items arrived after the 2-month (?) window to give feedback. So none of his visible feedback reflects his slow shipping.

One general lesson learned, aside from 'avoid this seller': Economy Shipping isn't the same thing as China Post, which is a government owned service intended to promote China's export capability, and relatively efficient. Shipping Carrier: FLYT. I can't find them but saw a couple of bad reviews that they are the slowest shipper that exits. Lesson: Avoid any Economy Shipping. In contrast, Express Shipping from China is fine.

Oh the 'vernier calipers'? I didn't expect much but these are just kids toys. The long marks every quarter inch are identical size so at a glance you can't recognize the unlabelled first inch mark. I thought these would be a short version of the usual 6 inch vernier caliper but instead they are miniatures of it. The metric markings are decent so these may be useful as intended, to leave with my socket and wrench sets to quickly judge a bolt head. For inch-designated wrenches, probably no better than just 'grab a few wrenches and try them all'.

Bah.

California, if it's worth it to you, I'd bump this up to Ebay customer service. As I recall, you can do it with a couple of clicks. I bet you'll get a reply within an hour that they've issued you a refund. More importantly, they can take further action if it's a known issue with this seller. If folks don't escalate to them, they won't know.

My guess is that this is a real outlier. I've ordered small items from various sellers that only shipped "Economy Shipping", and the estimated time has always been met or beaten.

Also, why not start a separate thread, e.g. "Ebay "Economy Shipping" experience"?

Or "Why it makes sense to buy cheap stuff from Harbor Freight instead of Ebay". :laughing: